An advanced plate generator which doesn't result in 13.99999mm cutouts.
Also fillets the cutouts so you don't have to waste hours later. Enjoy.
Default values are recommended.
Recommended 0.5mm; larger radii can cause issues with part fitment.
Best leave these alone unless you know what you are doing.
For Cherry MX, MX Low Profile, and clones which fit 14x14mm cutouts.
For Alps SKCM/SKCL, SKBM/SKBM, Matias, and derivative clones.
For Omron B3G-S series and derivative clones. Not for Romer-G.
Modeled around the official Cherry MX datasheet, simplified into a rectangle.
A cutout noticeably larger than the official datasheet version.
Alps stabilizers; uses 2.25U wire for right shift.
Alps stabilizers; uses 2.75U wire for right shift.
Nothing whatsoever.
Vertical cuts on each side of 1.5+U keys.
In addition to the typical cuts, adds vertical cuts on 2-3U stabilized keys.
In addition to the typical KLE data, you can add the following data fields to the key info:
Rotate the stabilizers. For example, {_rs:180} will flip stabilizers for bottom row keys.
{_rs:180}
Rotate the switch cutouts. For example, {_rc:90} will turn the cutout without rotating any other part of the key.
{_rc:90}